Unique Tips About How To Clean A Flintlock Rifle

Mix equal parts of all three liquids in to a dark bottle.

How to clean a flintlock rifle. Since you are new i will warn you against using a dry pach and jag to clean your barrel. I get a lot of requests to do a video on cleaning muzzleloading rifles. Each time you fire your flintlock the stone cuts off small metal particles from the surface.

I hadn’t done it before now because the subject is just so simple, i’m not sure that. Use a nipple pick or a needle to make sure there is no fouling in the tiny orifice. Between shots at the range i use a lightly wetted (soapy.

If it is fouled/plugged, you will have poor ignition or a total. With the breechplug and/or nipple removed, clean it. Mix equal parts of all three liquids in to a dark bottle.

Special thanks to simeon england for sharing his expertise with us!visit our website! Here are a few thoughts on cleaning your rifles in a practical and efficient way from the. Cleaning your blackpowder rifle can be time consuming if don't learn the basics.

Stick the muzzle in the water and run a brush up and down the barrel the brush will pull the. These small particles are the sparks. The best way is to remove the barrel, fill a bucket with hot water and dish soap.

Apply a light coat of grease to the place where the mainspring mates with the tumbler, and to the half and full cock. (scary if you’ve never taken the. After getting the bore and lock clean, i soak the bore with.